System Configuration & Components

Stage	Component	Function	Tank/Module
Stage 1	High-Porosity Oxygenation Media	Enhances gas exchange & dissolved oxygen	8×44″ FRP Tank
Stage 2	Oxygenation Bio-Carrier Media	Supports aerobic bacteria for oxygen stabilization	7×44″ FRP Tank
Stage 3	Ultrafiltration (UF) Membrane	Removes bacteria, viruses, and fine particles	UF Module (0.01 μm pores)

Preloaded Media Composition

Component	Percentage (%)	Function
Sintered Ceramic Oxygenation Media	40%	Increases gas exchange, enhances aeration
Porous Volcanic Rock (Pumice)	25%	Natural oxygen diffusion & biofilm support
Zeolite + Manganese Coating	20%	Removes oxygen-consuming contaminants
Floating Bio-Media (MBBR Biofilm Carriers)	15%	Promotes beneficial bacteria growth for stable oxygen levels

System Technical Specifications

Specification	Tank 1 (8×44″)	Tank 2 (7×44″)	UF Module
Tank Size	8″×44″ FRP	7″×44″ FRP	UF Membrane Housing
Tank Volume	38 Liters	30 Liters	10–50 Liters per membrane
Media Fill Level	70% (Freeboard: 30%)	70% (Freeboard: 30%)	N/A
Service Flow Rate	1.5 – 3.0 GPM	1.2 – 2.5 GPM	2.0 – 5.0 GPM
Backwash Flow Rate	3.0 – 4.0 GPM	2.5 – 3.5 GPM	Automatic flushing
Operating Pressure	20 – 100 psi	20 – 100 psi	30 – 60 psi
Operating Temperature	4 – 45°C	4 – 45°C	4 – 45°C
Filtration Accuracy	N/A	N/A	0.01 Micron
Bacteria/Virus Removal	N/A	N/A	99.99%

Key Features & Benefits

✅ Chemical-Free Oxygenation & Purification – Enhances DO levels and removes bacteria without additives.
✅ Improves Fish Health & Growth – Supports high oxygen levels, pathogen reduction, and stable water quality.
✅ Removes Oxygen-Consuming Contaminants – Manganese-coated zeolite eliminates iron, hydrogen sulfide, and ammonia.
✅ UF Module for Microbial Protection – Blocks bacteria, viruses, and fine particles down to 0.01 microns.
✅ High Surface Area for Aeration & Biofiltration – Optimized for gas exchange and bacterial growth.
✅ Long-Lasting Performance – Media lasts 2–3 years with proper maintenance.

Application & Installation Guidelines

Application	Recommended Flow Rate	System Capacity
Aquaculture & Fish Farms	1.5 – 3.0 GPM	Up to 50,000 Liters
Recirculating Aquaculture Systems (RAS)	2.0 – 4.0 GPM	Up to 100,000 Liters
Well Water Treatment for Fish Tanks	1.5 – 3.0 GPM	Up to 10,000 Liters

Installation Flow Diagram

1️⃣ Water Source (Pond, Well, or Tank Water) →
2️⃣ Pre-Filtration (If Required – Sediment or Carbon Filter) →
3️⃣ AquanOX Oxygenation Tank 1 (8×44″) →
4️⃣ AquanOX Bio-Carrier Tank 2 (7×44″) →
5️⃣ Ultrafiltration (UF Module, 0.01 Microns) →
6️⃣ Fish Tank, Pond, or RAS System

(A flow diagram is included in the document for reference.)

Maintenance & Backwash Instructions

FRP Tanks: Backwash every 7–14 days, depending on turbidity and contaminant levels.
UF Module Cleaning: Flush with clean water every 1–2 weeks, replace every 12–18 months.
Replacement Cycle:
- Media lasts 2–3 years with proper maintenance.
- UF membrane replacement every 12–18 months for optimal filtration.
System Monitoring: Check DO levels, pressure drop, and flow rates periodically.

Ordering Information & Availability

Product Code: AQN-OXUF844 / AQN-OXUF744
Available Sizes: 8×44″ FRP Tank, 7×44″ FRP Tank, UF Module
Packaging: Delivered prefilled in tanks, ready for installation
Bulk Orders: Custom configurations available upon request

For more information, installation support, or bulk orders, contact Aquasolve Water Technology.