Aquasolve Water Softening System

Technical Specifications

General Information:

• Model: AQ-SOFT-1244-EXT
• Application: Removal of hardness minerals (calcium and magnesium)
• Tank Size: 12-inch diameter × 44-inch height
• Tank Material: FRP (Fiber Reinforced Plastic)
• Brine Tank Capacity: 70 liters
• Control Valve: Automatic regeneration with programmable settings
• Resin Type: Extrepure Cation Resin
• Resin Quantity: Two bags (totaling approximately 50 liters)
• Flow Rate:
  • Service Flow Rate: Up to 12 gallons per minute (GPM)
  • Backwash Flow Rate: Minimum 5 GPM

Components:

1. FRP Resin Tank:
   • Size: 12″ × 44″
   • Material: Corrosion-resistant FRP
   • Pressure Rating: Maximum 150 psi (10.3 bar)
   • Temperature Range: 35°F – 120°F (1.7°C – 49°C)
   • Base: 2.5″–8 NPSM threaded opening
2. Ion Exchange Resin:
   • Type: Extrepure Cation Resin
   • Quantity: Two bags
   • Bag Size: Approximately 25 liters per bag
   • Function: Exchanges hardness ions (Ca²⁺, Mg²⁺) for sodium ions (Na⁺)
   • Capacity: High-capacity resin for efficient softening
3. 70-Liter Brine Tank:
   • Material: Heavy-duty polyethylene
   • Dimensions: Approximately 14″ diameter × 34″ height
   • Salt Storage Capacity: Up to 70 liters (~100 pounds of salt)
   • Includes: Salt grid plate, brine well, and safety float valve
4. Automatic Control Valve:
   • Type: Metered or time-clock regeneration (specify upon ordering)
   • Material: Lead-free brass or NSF-certified thermoplastic
   • Connections: 1″ NPT/BSP inlet and outlet
   • Features: LCD display, adjustable regeneration cycles
   • Power Supply: 220V/50Hz
5. Regeneration Salt:
   • Type: Standard sodium chloride (NaCl) pellets or crystals
   • Quantity: 1 bag initial supply included (specify extra amount upon ordering)

Operating Conditions:

• Feed Water Hardness: Up to 20 grains per gallon (342 ppm)
• Maximum Iron Content: Less than 0.3 ppm (ferrous iron)
• pH Range: 6.5 – 9.0
• Maximum Operating Pressure: 100 psi (6.9 bar)
• Maximum Operating Temperature: 100°F (38°C)
• Electrical Requirements: 220V/50Hz, power consumption approx. 5W

Connections:

• Inlet/Outlet Ports: 1″
• Drain Connection: 1/2″ or 3/4″ for regeneration waste
• Overflow Connection: 1/2″ from brine tank (safety overflow)

Physical Dimensions:

• Resin Tank Diameter: 12 inches (305 mm)
• Resin Tank Height (without control valve): 44 inches (1118 mm)
• Overall Height (with control valve): Approximately 52 inches (1321 mm)
• Brine Tank Dimensions: 14″ × 34″ (356 mm × 864 mm)
• Footprint: Compact design suitable for limited spaces
• Weight (Dry): Approximately 80 pounds (36 kg)
• Weight (Wet): Approximately 300 pounds (136 kg)

Features & Benefits

• Efficient Hardness Removal: Provides soft water by effectively removing calcium and magnesium ions using Extrepure Cation Resin.
• Automatic Regeneration: A programmable control valve automates the regeneration process based on water usage or set intervals.
• High-Quality Resin: Extrepure Cation Resin offers superior performance, high capacity, and extended service life.
• Includes Resin Supply: Comes with two bags of resin, ensuring the system is fully charged and ready for operation.
• Durable Construction: FRP tank and polyethylene brine tank resists corrosion and wear for long-term reliability.
• User-Friendly Interface: Easy-to-read LCD display with intuitive programming for hassle-free operation.
• Salt Efficiency: Metered regeneration minimizes salt and water consumption, reducing operational costs.
• Safety Features: Brine tank includes a safety float to prevent overfilling and spills.
• Low Maintenance: Requires minimal attention after installation; occasional salt and resin checks are needed.
• Compact Design: Space-saving footprint allows for installation in tight areas.

Applications

• Residential Use: Ideal for homes experiencing hard water issues, improving water quality for daily use.
• Light Commercial: Suitable for small businesses, offices, and restaurants needing soft water.
• Protects Plumbing and Appliances: Extends the life of water heaters, dishwashers, washing machines, and fixtures by preventing scale buildup.
• Improves Efficiency: Enhances soap and detergent effectiveness, leading to cleaner dishes and laundry.

Scope of Supply

• Main Unit: 12″ × 44″ FRP resin tank pre-filled with two bags of Extrepure Cation Resin
• Brine Tank: 70-liter capacity with all internal components
• Automatic Control Valve: Pre-installed and programmed according to your specifications
• Distributor Assembly: Internal riser tube and bottom distributor included
• Bypass Valve: Included for easy service and maintenance without disrupting water supply
• Initial Regeneration Salt: [Specify quantity included upon ordering]
• Installation Kit: Necessary fittings, connectors, and hardware for standard installation
• User Manual: Comprehensive installation, operation, and maintenance instructions

Optional Accessories

• Sediment Pre-Filter: Protects the resin from particulate fouling, extending its life
• Iron Removal Filter: Recommended if feed water contains higher iron content than specified
• Resin Cleaner: Chemical solution to maintain resin efficiency and prevent fouling
• Low Salt Alarm: Alerts users when salt levels are low in the brine tank, ensuring continuous operation
• Water Hardness Test Kit: For monitoring water hardness levels before and after treatment

Installation & Maintenance

• Installation:
  • Should be performed by a qualified technician.
  • Requires connection to main water supply, drain line, and electrical outlet.
  • Placement should allow easy access for maintenance and salt refilling.
• Maintenance:
  • Salt Refilling: Check the brine tank monthly and refill it with regeneration salt as needed.
  • Resin Inspection: Extrepure Cation Resin typically lasts 7–10 years; inspect annually for optimal performance.
  • System Programming: Adjust control valve settings based on water hardness and household water usage.
  • Regular Checks: Inspect the control valve, brine tank, and connections periodically for leaks or malfunctions.

Warranty & Support

• Warranty: 1-year limited warranty covering manufacturing defects on all system components.
• Technical Support: Available via phone or email during business hours for troubleshooting and inquiries.
• Replacement Parts: Easily obtainable for resin, control valves, and other components to ensure longevity.
• Service Plans: Optional maintenance contracts are available for regular servicing and priority support.

Ordering Information

• Product Code: AQ-SOFT-1244-EXT
• Availability: Typically in stock; please contact us for current lead times.
• Pricing: [Contact us for a customized quote tailored to your specific needs.]
• Customization: Specify electrical requirements (110V/60Hz or 220V/50Hz) and any optional accessories when placing your order.